Skip to content
D&D AI Solutions
Menu

THE SEAL360 AI · Jidoka technology, implemented by D&D AI Solutions

Every seal.
Every angle.

A turnkey AI inspection cell for metal-cased shaft seals and cassette seals. Fourteen cameras check both faces of every seal, lip, spring, grease and sealant bead included, in 1.3 seconds. One cell runs multiple seal sizes, with a changeover of about 15 minutes.

THE SEAL360 AI title card: the ring of camera segments and the line “Zero escapes. Every seal, every angle.”
cameras: 9 on top, 5 below
14cameras: 9 on top, 5 below
coverage on both faces of every seal
360°coverage on both faces of every seal
inspection time per seal
1.3 sinspection time per seal
from order to delivery
4 monthsfrom order to delivery

Seals are among the hardest parts to inspect

A metal-cased shaft seal or cassette seal has to be right everywhere, at line speed. Manual checks get tired, and partial camera inspection misses what matters. One escaped defect can mean a leak, a claim or a recall.

Lip and geometry

Flash, short shots and a tucked lip are small, but they decide whether a seal holds.

Spring, grease and sealant bead

Missing or rusted springs, grease where it should not be and an uneven bead are hard to see by eye.

Both faces, every part

OEMs ask for 100% inspection. That means the top and the bottom of every seal, not a sample.

How it works

One turnkey cell, from loading to verdict

THE SEAL360 AI handles the whole inspection without an operator at the belt.

  1. 01

    Hands-free feeding

    Fill the buffer once. The auto-feeder loads every seal into the cell.

  2. 02

    Two-stage belt cleaning

    A scraper and a brush with air keep grease off the belt, so the images stay clean.

  3. 03

    14-camera scan

    Nine cameras on top, five below, plus inner and outer diameter.

  4. 04

    Grippers flip the seal

    Every seal is turned automatically, so both faces are inspected without manual handling.

  5. 05

    AI verdict, sorted

    Vision AI trained on your own parts decides, and good and bad seals are sorted apart.

Illustration of the two-stage belt cleaning: a scraper, then a brush with air, before the seals reach the cameras.

What it catches

15 defect types, trained on your own parts

The vision AI learns your seals and your defects. It flags what classic rule-based vision misses, and sorts every part automatically.

  • Flash
  • Short shot
  • Tucked lip
  • Fog
  • Rusted spring
  • Spring presence
  • Grease
  • Sealant bead

99%

defect detection

Precise vision AI on every seal, top and bottom, at full line speed.

Specifications

Built for European seal production

Parts
Metal-cased shaft seals, cassette seals, bonded rubber-to-metal seals
Seal sizes and variants
Multiple sizes and variants on one cell, each with its own quick-change fixture labelled per part number. Changeover to another size takes about 15 minutes
Cycle time
1.3 seconds per seal, for every variant
Cameras
14 (9 top, 5 bottom), plus inner and outer diameter
Handling
Auto-feeder with buffer, grippers that flip every seal, automatic sorting
Belt cleaning
Two stages: scraper, then brush with air
Defect types
15, trained on your own parts
Detection
99% defect detection
Power and compliance
400 V / 50 Hz, CE marked
Delivery
4 months from order

Why THE SEAL360 AI

Seal inspection is a domain Jidoka has specialised in. Its vision AI already runs at several Tier-1 suppliers in the automotive industry. D&D AI Solutions brings it to European manufacturers and stays with you after installation.

Proven at Tier-1 automotive suppliers

Jidoka has built inspection solutions for several Tier-1 automotive suppliers, and specialised in exactly this product family: metal case, rubber lip, spring and grease.

Turnkey, and flexible

Feeding, cleaning, cameras, flipping, AI and sorting in one cell. Switch to another seal size in about 15 minutes with a quick-change fixture. No integration project on your side.

European delivery and support

400 V / 50 Hz and CE as standard, delivered in 4 months, with implementation and support by D&D AI Solutions.

Feasibility check

Send us your samples. We show you what the cell finds.

  1. 01Tell us which seals you make and roughly how many per year.
  2. 02Send good parts and parts with known defects.
  3. 03We run them and walk you through the results and a business case for your line.

Questions first? Email danny@dndaisolutions.com

We reply within 24 hours. Your data is only used to respond to this request.